Showing posts with label Fluorescent Lights tripping. Show all posts
Showing posts with label Fluorescent Lights tripping. Show all posts

Friday, August 23, 2013

Chapter 164....The First Shelf Unit and Electrical At The Store


Chapter 164...Shelves and Electrical For The Store

I know it has been a long time but life has taken a change for the good and Mike and I are excited about our new upcoming project.  But back to the store for now.  We are in no rush to "finish" the store as this was really just something for us to do while increasing the value of our land.


Let me tell you about us getting the first shelves built and installed in the store.  We built the boxes and painted them at the house.  Today we are taking them to the store:



We laid out the "boxes" and attached the legs.  Mike is screwing the legs on:



A little awkward but Mike is almost done with our first shelf unit:



After we get them screwed together, Mike and I stand it up together and put it against the wall:

A little spackle, some more paint and they will look great:)



Next it's time for Mike to work on the electrical outlets.  We had to wait until after the sheetrock was done before Mike could do this.  Mike pulls out the wires to start wiring:



He strips off the extra wire casing so he can work with the actual wire:



Stripping tool for taking off the outer wire coating:




Wires are now stripped and ready to be installed into an outlet:




Mike uses the easy outlets which lets you plug in the wires:




One outlet is almost wired up.  Only about 20 more to go:




Putting the copper ground wire on:




More shelving ready to be put together:



Mike working on our overhead lights.  We did have a problem with the shop lights and we thought they were defective.  They were not.  Here is an FYI about fluorescent lights.  We were testing the lights and plugged them into a ground fault receptacle which kept tripping the line and the lights would go out.  We thought it was the light but it turned out to be the receptacle.  There is something about ground fault receptacles and fluorescent lights that don't mix.  Plugged into a regular receptacle and the light works fine.  We also had no trouble using compressors and all other tools on that same ground fault receptacle.  Just the fluorescent lights had a problem.



And the electrical box getting organized:



While Mike works on all the electrical I work on painting the floor trim:



And more:



The inside of the store is really coming together.  It won't be much longer before we are done.  Then we will have to finish the outside.


Sorry this on is short and sweet.  That's all for now and I will keep you posted on our progress everywhere:)